Lubricants, Sealants, Adhesives
Tube Ref No. Description Where Used Part No.
Extreme Grease Propeller shaft splines 8M0071842
7
Loctite® 271 Threadlocker Pinion nut threads 92-809819
82
Premium Gear Lubricant Inside diameter and outside diameter of pinion bearing 92-858058K01
95
2-4-C with PTFE
Shift shaft O-ring
Bearing carrier seal lips
Bearing carrier O-ring
Apply to seal lips and O-rings
Water pump drive key
Inside diameter of the water pump liner
Driveshaft splines
Propeller shaft splines
92-802859A 1
Special Tools
Bearing Puller Assembly 91‑ 83165T
3610
Removes bearings, races, and bearing carriers
Torch Lamp 91‑ 63209
Heats surfaces to aid in the removal and installation of interference fit engine
components.
Spring Pin Removal Tool 91‑853996‑6
Aids in the removal of the spring pins
Driveshaft Holding Tool 91‑804762
Holds the driveshaft while removing or installing the pinion gear nut
Gear Housing (2.15:1)
Page 6A-2 © 2018 Mercury Marine 90-8M0125265 eng NOVEMBER 2017
To Next Page
Loading...
Need help?
General