Micromeritics TRISTAR II PLUS - Page 146

7 About Reports
6. In the Select Imported Overlays window, if the ASCIItext file does not display, click Import
to locate the file.
7. Select the ASCII text file in the Select Imported Overlays window, then click OK. If an error
message is displayed, verify that the .TXTfile format is in the correct format.
8. To include the overlay data in a printed report, see Print Pore Size Distribution Overlay
Data in Reports below.
OVERLAY PORE SIZE DISTRIBUTION DATA USING COPY/PASTE
1. Open a source sample file and a target sample file; both should have a Complete status.
The report will open to the interactive reports window.
2. In the source sample file, right-click on the graph and select Show Curve.
3. Deselect any differential curve data to hide them in the graph.
4. Right-click in the graph area again and select Copy Data.
5. Change to the target sample file, right-click the graph, and select Paste data. The graph
now displays overlayed data from the source sample file.
Typically, one new graph will appear showing both the cumulative and differential curves.
To show or hide individual curves, right-click the graph and select (or deselect) Display
imported data.
6. Ensure that all parameter fields are set appropriately, then click Paste.
7. To include the overlay data in a printed report, see Print Pore Size Distribution Overlay Data
in Reports.
Print Pore Size Distribution Overlay Data in Reports
1. Open the sample file containing the overlay data and select Advanced from the view
selector drop-down list at the bottom of the window.
2. Click the Report Options tab.
3. In the Selected Reports list box, select the cumulative, differential, or incremental intrusion
graph to show the imported distribution data, then click Edit (or double-click the selected
report).
4. In the Overlay drop-down box, select Imported.
5. Click OKto close the window.
6. Click Preview on the Report Options tab.
7. Click Print in the reports toolbar section to display print options.
7 - 30
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023