3
Used when S1 set value changing mode is required, and also carrying the values at the time of
various kinds of set value is required.
Also Tare (A/Z) will be executed by pressing the key together.
8
key
Used when S2 set value changing mode is required, and also when the digit down for the values
are required at the time of various kinds of setting is applied.
Also Tare Clear (A/Z OFF)can be executed by pressing the key together.
9
key
Used when S3 set value changing mode is required, and also used for the values of increment
at the time of various kinds of setting is applied.
Also by pressing the key together, Zero set (One−touched zero point adjustment) can be
executed.
10
key
Used when S4 set value changing mode is required, and also used for the values of decrement
at the time of various kinds of setting is applied.
11
key
Used when transferring to the Function mode is applied.
Also used when the target for fine adjustment is changed into whichever “ZERO” or “SPAN”
in fine adjustment on ZERO/SPAN.
12
key
Used when ON/OFF operation is made for the CHECK value. Also by pressing the key
together simultaneously, ZERO/SPAN fine adjustment can be entered.
13
key
Used when registration for set value is required at the time of various kinds of setting is
applied.
14
Position of the Unit seal is attached.
As necessity requires, paste the Unit seal attached.
To Next Page
Loading...
Need help?
General
