155
11−11. Options
11−11−1.
Current output
･ P/N CSD814B−P07
･ Specifications
Output DC4 mA to 20 mA
Load resistance 510 Ω or less
Non−Linearity 0.05 %F.S.
Over range Less than approx. −8 %F.S. and more than approx. +8 %F.S
11−11−2.
Voltage output
･ P/N CSD814B−P23(DC0 V to 1 V)
･ P/N CSD814B−P24(DC0 V to 5 V)
･ P/N CSD814B−P25(DC0 V to 10 V)
･ P/N CSD814B−P26(DC1 V to 5 V)
･ Specifications
Output DC0 V to 1 V, DC0 V to 5 V, DC0 V to 10 V, DC1 V to 5 V
Load resistance 5 kΩ or more
Non−Linearity Within 0.05 %F.S.
Over range Less than approx. −8 %F.S. and more than approx. +8 %F.S.
11−11−3.
BCD output
･ P/N CSD814B−P15
･ Specifications
Output ･ BCD 6 digits Parallel output, with polarity
(Output ON at minus and output OFF at plus)
･ P.C.(Print command) ON during constant time after conversion of BCD
output has completed.
･ ERROR ON when various kinds of error(s) has(have) occurred.
･ OVR(Over)
Above are Open collector outputs V
CE
＝ DC30 V, I
C
＝ DC30 mA MAX
※ Other than the Measurement Mode, renewal of output shall not be provided.
Input ･ HOLD
Hold of Display, Comparative output, BCD output(Option), Current output
(Option), and Voltage output(Option),
･ BCD−ENABLE
※ Above BCD related output will be forced to OFF.(High−impedance)
･ By the combination of 2 input condition of SEL1 and SEL2, target for BCD
output can be changed as follows:
Both SEL. 1 and SEL. 2 are open. : Interlocked with load display.
Short of SEL. 1 only : Cancelled portion of A/Z
Short of SEL. 2 only : Net weight is frozen.
Both SEL.1 and SEL. 2 are short : Gross weight is frozen.
※ Above Level inputs are effective during input is applied with short at more
than 100 ms.
To Next Page
Loading...
Need help?
General
