Minebea CSD-814B User Manual

156
11−11−4. RS−232C Interface
･ P/N CSD814B−P74
･ Specifications
Baud rate : Select among 600, 1 200, 2 400, 4 800, 9 600 and 19 200 bps.
Data bit length : Select from 7 bits and 8 bits.
Parity bit : Select from Non, Even and Odd.
Stop bit : Select from 1 bit and 2 bits.
Terminator : CR + LF
Communication method : Half duplex
Synchronous method : Start−stop synchronous method
Sending data : ASCII code
※ Communication will stop when other than the Measurement Mode is executed.
11−11−5. RS−422 Interface
･ P/N CSD814B−P76
･ Specifications
Baud rate : Select among 600, 1 200, 2 400, 4 800, 9 600 and 19 200 bps.
Data bit length : Select from 7 bits and 8 bits
Parity bit : Select from Non, Even and Odd.
Stop bit : Select from 1 bit and 2 bits
Terminator : CR+LF
Communication method: Half−duplex
Synchronous method : Start−stop synchronous method
Address : Select one among 0 to 9.
Sending data : ASCII code
Cable length : Approx. 1 km
Number of Connection : 10 pieces at maximum
Termination : Built−in(Yes/No can be selected by the switch.)
Monitor LED for Input/Output is attached.
※The communication will stop during the Mode other than the Measurement Mode.
11−11−6. Serial interface
･ P/N : CSD814B−P77
･ Specifications : 2 wires method serial interface
Baud rate : 600 bps
Data bit length : 8 bits
Parity bit : Odd number
Stop bit : 1 bit
Sending data : Binary code, BCD
※ The communication will stop during the Mode other than the Measurement Mode.

Minebea CSD-814B Specifications

General

Brand	Minebea
Model	CSD-814B
Category	Measuring Instruments
Language	English