VII
Record of revision
Date Ref. No. of Manual Revised Ref. No.(Contents) Remarks
Sep. 2004
DRW. NO. EN294−1213 First version After Ver. 1.800
Apr. 2005
DRW. NO. EN294−1213−A
Due to ECN No.FN05−02035
− Addition −
At the warning column in the wiring section, the clause of
”As there is a case which standard wiring color is different,
please confirm the inspection data sheet of the load cell
being used.” is added.
Mar. 2006
DRW. NO. EN294−1213−B
Due to ECN No.FN06−02025
− Correction −
7−5−2. “2
m
”→”2
m+1
”
Aug. 2006
DRW. NO EN294−1213−C
Due to ECN No.FN06−02099
− Correction −
Add the selectable function of turning ON/OFF for “RUN”
indicator in status display section.
[Since ROM Ver. 2.700]
Sep. 2007
DRW. NO EN294−1213−D
Due to ECN No. FN07−02093
− Correction −
Add the grounding terminal on the rear panel drawing.
Due to ECN No. FN07−02100
10−1. Trouble shooting
“Measure the voltage between the terminals of A and C on
the rear panel terminal board.”
→ “Measure the voltage between the terminals of A and C
after shortening each of the terminals between A−F, and
C−G on the rear panel terminal board.
Oct. 2010
DRW. NO EN294−1213−E
Due to ECN No. FN10−02140
− Change −
Minebea logo is changed
Jan.2011
DRW. NO EN294−1213−F
Due to ECN No.FN11−02018
− Correction −
9−3−4. “DE−9S−N(JAE)”
to “DE−9S−NR by JAE or equivalent.”
To Next Page
Loading...