III
For safe operation
Be sure to read this manual before use.
1. Installation place
● Use the instrument where the temperature/humidity specifies within
the range as follows:
Environmental temperature : −10 ℃ to 50 ℃
Environmental humidity : Less than 85 %R.H.
(
Non condensing.)
(1) Location where installation is not allowed.
Warning ● Don’t locate the instrument on the places such as follows:
It may cause an unexpected faulty in the instrument.
・ Don’t locate the instrument in direct and/or high temperature area.
・ Don’t use the instrument in a high humid area.
・ Don’t install the instrument where there is high mechanical vibration.
・ Don’t use the instrument where there is excess of dust and fine particles.
・ Don’t install the instrument near the devices that become magnetized or
generate an electromagnetic field.
・ Don’t install the instrument where there is rapid change of temperature
and humidity.
・ Don’t install the instrument near the devices that are magnetized or
generate an electromagnetic field.
・ Avoid the location where chemical reaction may take place such as in a
laboratory.
To Next Page
Loading...
Need help?
General
