2. CNC Monitor Screen
2.5 Program
I - 122
[Character string search]
The same character string as the search data is searched and the cursor will move to that word.(The
search data will not be cleared.)
Use [STR.↑] and [STR.↓] keys for character
string search.
(1) Press the menu [LOOK UP]
The cursor moves to <SEARCH DATA>.
(2) Enter the keys for the word data to be
searched.
(Example) B35
Up to 11 characters can be designated for
the search data.
(3) Select upward search or downward search.
(Example) [STR.↓]
(a) The message "SEARCH EXECUTION" appears during the search.
(b) The character string relevant to the search data is searched rather than the word highlighted with
the cursor.
(c) The cursor moves to the searched word.
(d) The search data is not cleared.
(e) The screen returns to the 1st menu after the search is completed.
(f) The screen returns to the 1st menu if the menu key [RETURN] is pressed.
To Next Page
Loading...
Need help?
General
