2. CNC Monitor Screen
2.5 Program
I - 131
[Deleting a program]
A program to execute automatic operation can be deleted from the machining programs registered in the
memory.
(1) Set the program No. to be deleted.
(Example)
O( 1111) N( )
－
( )
O( 1111) N( )-( )
(2) Press [C.B].
(a) 1) [PROGRAM FILE] will be updated.
2) "DELETE? (Y/N)" is displayed.
0 3
N45 G00 X0 Z0 ;
N50 G00 X100.0 ;
N55 Z100.0 ;
[PROGRAM FILE]
1 25 TESTCUT
2 19
3
4
5
(b) "DELETE? (Y/N)" is displayed.
O( 1111) N( )-( )
DELETE?(Y/N)
(3) Press [Y].
(4) Press [INPUT] to delete.
(a) Start deleting.
(b) When the designated program No. is
found, that program will be deleted.
(c) Press [RETURN] to go back to the word
edit screen (the first menu).
(Note 1) If the data is found in "N ( ) - ( )" when deleting the program, these values are ignored.
(Note 2) When the sub-program which is called from the main program currently being executed is
designated, it can be deleted as long as it is not running. However the executing program's
operation is not guaranteed. An error will occur if a running sub-program is designated to delete.
(Note 3) Batch deletion for the setting area is not possible.
(Note 4) When a program is deleted, [PROGRAM FILE] will be updated. But the program display column
will not be update.
To Next Page
Loading...
Need help?
General
