MOOR INSTRUMENTS moorLDI2 RESEARCH USER MANUAL
7
1.3 BEAM DELIVERY SYSTEM
The laser light source assembly consists of a visible red laser diode with a collimating lens to
produce a beam of laser light (see Figure 1, below)
A solenoid operated attenuator mounted in front of the laser aperture of the assembly can be switched
between a full power working beam (<2.5mW visible red) and an attenuated beam (<200µW). The
beam is directed to the scanning mirror via two front silvered mirrors. The scanning mirror is
computer controlled to direct the beam to the skin surface.
FIGURE 1
To Next Page
Loading...