Moor Instruments moorLDI2-VR - Add Constant; Subtract Constant; Multiply Constant; Divide Constant

MOOR INSTRUMENTS moorLDI2 RESEARCH USER MANUAL
77
11.9 CONSTANT (+,-,x,/)
11.9.1 ADD CONSTANT
Add a constant to the flux image.
11.9.2 SUBTRACT CONSTANT
Subtract a constant from the flux image.
11.9.3 MULTIPLY CONSTANT
Enables rescaling of an image. An example of its use might be to set baseline images to similar
values so that subsequent responses can be compared.
The validity of this manipulation should be carefully considered in each situation before it is applied.
11.9.4 DIVIDE CONSTANT
Divide the flux image by a constant.