137
电源相关
POWER-RELATED
7 小心 7 CAUTION
当将信号线连接至 RS232C 接口连接器或将其从 RS232C 接口
连接器断开时，关闭机床和外部 I/O 装置的电源。电源接通时
进行连接或断开可能会导致故障。
When connecting the signal line to the RS232C interface
connector or disconnecting it from the RS232C interface
connector, turn off the power to the machine and external
I/O device. Connecting or disconnecting with the power on
may cause malfunction.
2 注意 2 NOTE
根据型号和规格的不同， RS232C 接口连接器在电气柜中的位置可能发
生变化。
The location of RS232C interface connector in the electrical cabinet
may vary depending on the models and specifications.
1 关于 DNC 模式操作，参见 “ 模式选择按钮 ” （ 139 页）。 1 Refer to the “Mode Selection Buttons” (page 139) for DNC mode
operation.
To Next Page
Loading...
