mori seiki NMV5000 DCG - 功能选择键 屏幕; FUNCTION SELECTION KEYS Screen; 宏变量 屏幕; MACRO VARIABLE Screen

215
功能选择键和显示屏幕
FUNCTION SELECTION KEYS AND DISPLAY SCREENS
从“R∗∗”到“L∗∗”切换‘ 软键 ’栏的编号。 Switches the numbers on the ‘ SOFTKEY ’ column from “ R∗∗”
to “ L∗∗”.
此软键用于将左侧软键设定为快捷键。 This soft-key is used to set a shortcut to the left-side soft-keys.
[ 右 软键 ] [RIGHT SOFTKEY]
从“L∗∗”到“R∗∗”切换“ 软键 ”栏的编号。 Switches the numbers on the ‘ Soft-key ’ column from “ L∗∗” to
“R∗∗”.
此软键用于将右侧软键设定为快捷键。 This soft-key is used to set a shortcut to the right-side
soft-keys.
[ 清除 ] [CLEAR]
用于删除快捷键。 Used to delete a shortcut key.
在‘ 功能 ’栏中选定要删除的快捷方式的功能，然后按下 [ 清除 ]
，再按下 [ 执行 ]。
Select a function with a shortcut to be deleted from the
‘ FUNCTION ’ column and press [CLEAR] and then
[EXECUTE].
‘ 功能 ’字段中的显示更改为‘ 未使用 ’，且快捷键清除。 The display in the ‘ FUNCTION ’ field changes to ‘ NOT USED ’
and the shortcut key is deleted.
[ 组 更改 ] [GROUP CHANGE]
‘ 功能列表 ’显示切换至下一组。 The ‘ FUNCTION LIST ’ display switches to the next set.
[ 退出 ] [EXIT]
返回至‘ 设定 ’（菜单）屏幕。 R
et
urn to the ‘ SETTING ’ (Menu) Screen.
‘ 功能选择键 ’屏幕 ‘ FUNCTION SELECTION KEYS ’ Screen
此屏幕用于设置打开电源后和显示警告屏幕后的第一个屏幕。 This screen is used to set the first screen that is displayed after
the power has been switched ON and the warning screen has
been displayed.
< 设置步骤 > <Setting Procedure>
1. 用光标移动键将初始显示屏幕选择功能设置为‘ 有效 ’。 1. Using the cursor control keys set ‘ VALID ’ for the initially
displayed screen selection function.
[ 显示初始显示屏幕的选项。] [The options for the initially displayed screen are
displayed.]
2. 输入屏幕底部显示的选择编号。 2. Input the selection number displayed in the lower part of the
screen.
3. 按下
[
(Enter) 键 /
\
( 输入 ) 键 D [ 设置 ] D [ 执行 ]。 3. Press the
[
(Enter) key/
\
(INPUT) key D [SET] D
[EXECUTE].
‘ 宏变量 ’屏幕 ‘ MACRO VARIABLE ’ Screen
此屏幕用于检查和输入宏变量的数值和名称。 This screen is used to check and input values and names of
macro variables.
< 自定义宏变量值屏幕 > <Custom macro variable values screen>
显示 40 个宏变量值。可以检查和输入每个值。 Values for 40 macro variables are displayed. It is possible to
check and input each value.
可以增量输入宏变量值。 Incremental input for macro variable values is also possible.
< 自定义宏变量名称屏幕 > <Custom macro variable names screen>
显示 20 个宏变量的数值和名称。可以检查和输入每个数值和名
称。
Values and names for 20 macro variables are displayed.
Checking and inputting of each value and name are possible.
可以增量输入宏变量值。 Incremental input for macro variable values is also possible.
功能选择键
s
( 设定 ) D [<] D [ 用户自定义 ] D [ 功能选择
键 ]
Function selection key
s
(SETTING) D [<] D
[CUSTOMIZE] D [FUNCTION KEYS]
功能选择键
s
( 设定 ) D [ 设置 ] D [ 宏变量 ]
Function selection key
s
(SETTING) D [SET] D [MACRO
VARIABLE]