mori seiki NMV5000 DCG - 阶段检查 屏幕; PERIODICAL INSPECTION Screen

201
功能选择键和显示屏幕
FUNCTION SELECTION KEYS AND DISPLAY SCREENS
5
< 从存储卡输入数据 > <Inputting Data from Memory Card>
1. 将存有所需数据的存储卡插入卡槽。 1. Insert the memory card that holds desired data into the card
slot.
2. 按下 [ 读取 ]。 2. Press [READ].
[ 显示存储在存储卡中的数据。] [The data stored in the memory card is displayed.]
3. 在‘ 输入 / 输出 ’屏幕上，将光标移动到要输入的数据。 3. On the ‘ INPUT/OUTPUT ’ screen, move the cursor to the
data to be input.
4. 按下 [ 执行 ]。 4. Press [EXECUTE].
[ 所选数据输入到存储区。] [The selected data is input to the memory area.]
< 删除输出文件 / 文件夹 > <Deleting Output File/Folder>
< 删除输入文件 / 文件夹 > <Deleting Input File/Folder>
2 注意 2 NOTE
1. 如果文件夹包含文件或其他文件夹，则不能删除该文件夹。试图删
除文件夹前，删除储存在该文件夹下的文件和文件夹。
1. A folder cannot be deleted if it contains files or other folders. Delete
the files and folders stored in the folder to be deleted before
attempting folder deletion.
2. 仅当‘ 输入 / 输出 ’屏幕上选择下列项目之一时，文件夹才能删除。 2. The folders can be deleted only if one of the following items is
selected on the ‘ INPUT/OUTPUT ’ screen.
‘NC 程序 ’, ‘补偿 ’, ‘数控参数 ’, ‘螺距错误 COMP. AMT ’, ‘ 宏变量 ’,
‘ 辅助轴参数 ’, ‘维护参数 ’, ‘ 操作历史记录 ’, ‘ 个人计算机参数 ’,
‘ MAPPS 参数 ’, ‘宏变量名 ’, ‘TEACH MACRO VARIABLE NAME’,
‘ 多功能计数注释 ’
‘ NC PROGRAM ’, ‘ OFFSET ’, ‘ NC PARAMETER ’, ‘ PITCH ERR.
COMP. AMT ’, ‘ MACRO VARIABLE ’, ‘ AUX. AXIS PARAMETER ’,
‘ MAINTENANCE PARAM. ’, ‘ OPERATION HISTORY ’, ‘ PC
PARAMETER ’, ‘ MAPPS PARAMETER ’, ‘ MACRO VARIABLE
NAME ’, ‘ TEACH MACRO VARIABLE NAME ’, ‘ MULTI
COUNTER COMMENT ’
< 删除文件夹内的文件 > <Deleting a File within a Folder>
‘ 阶段检查 ’屏幕 ‘ PERIODICAL INSPECTION ’ Screen
在屏幕上显示并设置维护数据。 The data for maintenance are displayed and set on the screen.
当设置的检查时间到来时，各个项目以红色高亮显示。在定期
检查 2 屏幕中，‘ ALM ’显示在‘ 状态 ’字段内。立即执行必须的
检查和维护任务。
When the set inspection time comes, the respective item is
highlighted in red. With the periodical inspection 2 screen,
‘ ALM ’ is displayed in the ‘ STATE ’ field. Perform the
necessary inspection and maintenance tasks immediately.
1 单独手册，保养手册“ 定期保养 ” 1 Separate volume, MAINTENANCE MANUAL “ REGULAR
MAINTENANCE ”
‘ 阶段检查 1 界面 ’屏幕 0 ‘ PERIODICAL INSPECTION 1 ’ Screen
显示加油、检查和易耗件更换的周期。 The intervals for oil replenishment, inspection, and
consumable part replacement interval are displayed.
‘ 积累时间 (HR) ’显示自动运行累计的持续时间。 ‘ ACCUMULATE TIME ’ displays the cumulative duration of
automatic operation.
1.
按下 [ 检查内容 ] 软键，显示每个周期的检查点。
5
1. The points to be inspected at each interval are displayed by
pressing the [CHECK CONTENT] soft-key.
2. 当累计时间达到检查时间，‘ 阶段检查项目 ’字段和‘ 积累时间
(HR) ’字段变红。
2. When the cumulative time reaches the inspection time, the
‘ PERIODICAL CHECK ITEM ’ field and ‘ ACCUMULATE
TIME ’ field become red.
[ 冲孔 ] D [ 文件夹选择 ] D 将光标移动到要删除的文件或文
件夹 D [ 删除 ]
[PUNCH] D [OUTPUT SETTING] D Move the cursor to the
file or folder to be deleted D [DELETE]
[ 读取 ] D 将光标移动到要删除的文件或文件夹 D [ 删除 ]
[READ] D Move the cursor to the file or folder to be deleted
D [DELETE]
将光标移动到要选择的文件夹 D
[
(Enter) 键 /
\
( 输入 )
键 D 将光标移动到要删除的文件 D [ 删除 ]
Move the cursor to the folder to be selected D
[
(Enter)
key/
\
(INPUT) key D Move the cursor to the file to be
deleted D [DELETE]
功能选择键
l
( 系统 ) D [ 定期检查 ]
Function selection key
l
(SYSTEM) D [PERIODIC
INSPECT.]