数控操作面板
NC OPERATION PANEL
172
用光标选择文件或搜索文件并选定后，按下此软键打开文件。 By pressing this soft-key after selecting the file with the cursor
or searching for a file and selecting it, the file is opened.
[ 返回 ] [BACK]
关闭媒体阅读器。 Ends the media viewer.
< 编辑格式文件时的软键功能 > <Soft-Key Functions when Editing Formatted Documents>
[ 新建 ] [NEW]
废弃当前编辑的文件，创建一个新文件。 Destroys the document currently being edited, and makes a
new document.
[ 打开 ] [OPEN]
调用文件选择屏幕打开另一个文件。 Calls the file selection screen for opening another file.
2 注意 2 NOTE
不能同时打开多个文件。 Multiple files cannot be opened at the same time.
[ 保存 ] [SAVE]
重写和保存当前编辑的文件。 Overwrites and saves the document currently being edited.
[ 插入 时间 ] [INSERT TIME]
在光标位置插入当前的日期和时间。 Inserts the present date and time into the cursor position.
[ 撤消 ] [UNDO]
取消先前的编辑操作。 Undoes the previous edit operation.
[ 加粗 ] [BOLD]
按下此软键将选定范围内的字符变为粗体。 Pressing this soft-key makes the characters in the specified
range bold.
[ 斜体 ] [ITALIC]
按下此软键将选定范围内的字符变为斜体。 Pressing this soft-key italicizes the characters in the specified
range.
[ 下划线 ] [UNDERLINE]
按下此软键给选定范围内的字符加下划线。 Pressing this soft-key underlines the characters in the specified
range.
[ 返回 ] [BACK]
格式文件编辑结束。 Ends editing of the formatted document.
[ 剪切 ] [CUT]
剪切选定的文本。 Cuts the selected text.
[ 目录 ] [EDITCOPY]
复制选定的文本。 Copies the selected text.
[ 粘贴 ] [PASTE]
将复制 / 剪切的文本粘贴至光标位置。 Pastes the copied/cut characters to the cursor position.
[ 更大 ] [LARGER]
将选定字符的尺寸增大两个点。 Enlarges the specified characters by two points.
[ 变小 ] [SMALLER]
将选定字符的尺寸缩小两个点。 Reduces the size of specified characters by two points.
[ 改变颜色 ] [CHANGE COLOR]
更改选定字符的颜色。 Changes the color of the specified characters.
每次按下此软键，字符依次变为黑色、红色、蓝色、绿色、黄
色、紫色、橙色和黑色。
Each time this soft-key is pressed, characters are changed to
black, red, blue, green, yellow, purple, orange, and black in this
order.
[ 左对齐 ] [ALIGN LEFT]
选定的段落左对齐。 The selected paragraph is aligned to the left.
[ 居中 ] [ALIGN CENTER]
选定的段落居中。 The selected paragraph is centered.
[ 右对齐 ] [AL
IGN RI
GHT]
选定的段落右对齐。 The selected paragraph is aligned to the right.
5工具栏按钮也可用于编辑。 5The toolbar buttons can also be used for editing.
2 注意 2 NOTE
1. 不能进行打印、字符串搜索和逐条格式设定。 1. Printing, character string searches, and itemization cannot be
done.
2. 由于数据类型，可能不能正确显示数据。 2. Data may not be displayed correctly depending on the data type.
To Next Page
Loading...
