mori seiki NMV5000 DCG - Page 196

数控操作面板
NC OPERATION PANEL
174
2. 如果在按下功能选择键
;
( 位置 ) 或
l
( 系统 ) 键之前按下
]
( 切
换 ) 键，屏幕不会因为一次按下功能选择键而改变。因此，再次按
下功能选择键。
2. If the
]
(Shift) key is pressed before the function selection key
;
(POS) or
l
(SYSTEM) is pressed, the screen is not changed by
pressing the function selection key once. Therefore, press the
function selection key again.