mori seiki NMV5000 DCG - Page 198

功能选择键和显示屏幕
FUNCTION SELECTION KEYS AND DISPLAY SCREENS
176
2 注意 2 NOTE
上图表示在编辑模式下显示的屏幕。程序屏幕上的功能根据所选的模式
而不同。
The figure above shows the screens displayed in the EDIT mode.
Functions on the program screens differ depending on the selected
mode.
1 “ 功能选择键 ( 程序 )” （ 180 页） 1 “Function Selection Key (PROG)” (page 180)
1 “ 功能选择键 ( 补偿 )” （ 189 页） 1 “Function Selection Key (OFFSET)” (page 189)
1 关于功能选择键
k
( 对话编程 ) 的详细信息，参见“ MAPPS 会话
编程手册 ”
1 For details on the function selection key
k
(CAPS), refer to
“ MAPPS CONVERSATIONAL PROGRAMMING MANUAL ”
1 关于功能选择键
,
(CAM) 的详细信息，参见“ESPRIT使用说明
书 ”
1 For details on the function selection key
,
(CAM), refer to
“ ESPRIT INSTRUCTION MANUAL ”
1 “ 功能选择键 ( 系统 )” （ 199 页） 1 “Function Selection Key (SYSTEM)” (page 199)
1 “ 功能选择键 ( 信息 )” （ 207 页） 1 “Function Selection Key (MESSAGE)” (page 207)
‘FIXTURE OFFSET’
‘SP SENSOR DATA
SETTING’
‘TIME LAG
COMPENSATION’
‘CENTER POSITION
OFFSET’
‘SETUP OPERATION
BASIC SETTING’
‘WORK SETTING
ERROR’
[SETUP PARAM.]
‘TOOL LIFE MANAGE’
‘TOOL REGISTRATION’
‘WORK OFFSET’
‘TOOL OFFSET’
(OFFSET)
‘主轴传感器数据设定’
‘夹具补偿界面’
‘时间延迟补偿’
‘中心位置补偿’‘基本设定界面’
‘工件安装错误’
[ 调试参数 ]
‘刀具寿命管理’
‘刀具注册’
‘工件补偿’
‘刀具补偿’
(补偿)
(CAPS)
( 对话编程 )
(CAM)
(CAM)
‘INPUT/OUTPUT’ ‘NC SYSTEM’ ‘MACHINE CONDITION’‘PERIODICAL
INSPECTION’
‘MAPPS PARAMETER’ ‘SYSTEM CONFIGURA-
TION’
‘NETWORK FUNCTION
SETTING’
(SYSTEM)
‘输入 / 输出’ ‘NC 系统’ ‘机床状态界面’‘阶段检查’
‘MAPPS 参数’ ‘系统结构’‘网络设置’
(系统)
‘NC ALARM’ ‘ALARM HISTORY’
‘APPLICATION
MESSAGE’
‘DATA SERVER’‘PLC ALARM’
(MESSAGE)
‘NC 报警’ ‘历史报警’ ‘应用信息’ ‘数据服务器’‘PLC 报警’
(信息)