数控程序
NC PROGRAM
28
2.
若在 G00 模式中的同一块中指定 X、Y 和 Z 轴移动，则从当前
位置至编程终点，刀具路径并不总是直线。确保刀具路径中
无障碍，记住 X、Y 和 Z 轴运动的快速进给速度。
[ 工件或夹具与刀具或刀座发生干涉 ]
2. If X-, Y-, and Z-axis movements are specified in the
same block in the G00 mode, the tool path is not
always a straight line from the present position to the
programmed end point. Make sure that there are no
obstacles in the tool path, remembering the rapid
traverse rate of X-, Y-, and Z-axis movement.
[Workpiece or fixture interference with tool or tool
holder]
3. 当使用机床坐标系设定功能设定坐标系时，在程序块G92 中
正确指定 X、Y 和 Z 的值。
[ 部件干扰 ]
3. When setting the coordinate system using the machine
coordinate system setting function, specify the X, Y,
and Z values in the G92 block correctly.
[Component interference]
To Next Page
Loading...
