Motion Control Engineering 2000

5-1
5
• In this Section
• Main Processor
• Computer Security
•Diagnostic Mode
• Program Mode
• Basic Features
• Fire Service
•Door Operation
•Timers
•Gongs/Lanterns
• Spare Inputs
•Spare Outputs
•Extra Features
• Additional Car Options
• External Memory Mode
•System Mode
In this Section
The Computer is the primary programming and adjustment tool for the Motion 2000 system.
This section provides the information you need to use the Computer, including:
• HC-MPU Main Processor: Describes the indicators, switches, buttons, connectors and
display on the HC-MPU Main Processor board (see page 5-2).
• Computer Security: Describes the optional password protection system (see page 5-5).
• Diagnostic Mode: Using the onboard diagnostics for troubleshooting (see page 5-6).
• Program Mode: Describes how to program the many options available, including:
•Basic Features Menu Options (see page 5-17)
• Fire Service Menu Options (see page 5-20)
• Door Operation Menu Options (see page 5-22)
•Timer Menu Options (see page 5-26)
• Gongs/Lanterns Menu Options (see page 5-28)
• Spare Inputs Menu Options (see page 5-29)
• Spare Outputs Menu Options (see page 5-39)
•Extra Features Menu Options (see page 5-48)
• Additional Car Options Menu (see page 5-54)
• External Memory Mode: How to view data stored in external memory (see page 5-56).
• System Mode: Describes system mode options, e.g., Building Security, Passcode
Request, Load Weighing and ASME A17.1 2000 Fault Bypass (see page 5-60).
• Duplexing: Describes how to troubleshoot communication problems (see page 5-108).
The Computer