Multiplex Profi TX - Page 41

Transmitter
Page 38
PROFI TX
16
Switch on the transmitter.
17
Verify that the controls operate correctly.
To test this, assign the new controls to any switched function in the
Setup > Assign.Switches menu.
18
Screw the tops of the digi-adjusters and potentiometers back on.
19
Date and time have to be set again in the Timer menu, as the battery
was removed.
Additional controls
The following additional controls can be installed in the PROFI TX (see also
section 10.2 "Accessories" on page 213):
 2-position switch (micro), short
Item No. 75750
 2-position switch (micro), long
Item No. 75751
 3-position switch (micro), short
Item No. 75752
 3-position switch (micro), long
Item No. 75753
 Digi-adjuster
Item No. 75755
 Rotary knob (micro)
Item No. 75756
 Push-button (micro)
Item No. 75754