Statement/Passbook Printer
How to Replace the Print Head
7-12 NCR Personas M Series 5887 Operator Manual
10 To tighten the ribbon, turn the knob on the cassette in the
direction of the arrow.
11 Push down the print head and ribbon cassette carrier until it
clicks in position.
12 Push the printer back into the ATM until it clicks into place.
13 Switch on the ATM power.
14 Wait for the operator display to display status messages (this
may take up to 5 minutes).
15 Follow your in-house procedures for indicating that you have
replaced the statement printer print head.
16 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the normal position.
17 Close and lock the exterior of the ATM.
To Next Page
Loading...
