Getting Started
How to Insert and Remove Disks
NCR Personas M Series 5887 Operator Manual 1-43
5 Place the CD or DVD-ROM in the tray with the printed label
visible and the machine readable surface next to the tray. Press
the eject button to retract the tray into the drive.
6 To remove the CD or DVD-ROM from the drive, press the eject
button on the drive to bring out the motorized tray. Remove the
CD or DVD-ROM from the tray and press the eject button to
retract the tray into the drive.
7 Close the drive bay cover by pushing it firmly so that the spring
loaded pins fully locate in their latches as shown below.
Caution This is an ESD (electrostatic discharge) sensitive device, therefore,
after any maintenance or service actions the drive bay cover must be
closed and fully latched home.
8 If fitted, close the disk security latch then lock or seal it as
required by your organization.
9 Close and lock the ATM.
SOFTWARE
To Next Page
Loading...
