Receipt Printer
How to Replenish Your Receipt Printer Paper
4-4 NCR Personas M Series 5887 Operator Manual
7 Remove sufficient paper from the new supply roll so that no
traces of glue or tape remain on the roll. Fold and tear off the
end of the paper to leave a clean, straight edge.
8 Insert the spindle into the core of the new paper roll. Lower the
paper roll into the printer so that the spindle drops into the slots.
The paper should feed from the top of the roll.
9 Guide the paper into the paper entry slot. Manually feed in
about
75 mm (3 in.) of paper until it stops.
To Next Page
Loading...
