Receipt Printer
How to Clear Receipt Printer Jams
4-10 NCR Personas M Series 5887 Operator Manual
15 If nothing happens when the feed button is pressed, the paper
may not have been loaded correctly. Check the paper is feeding
from the top of the roll. Open the print mechanism, rotate the
paper roll backwards to pull the paper clear and try loading the
paper again starting at Step 13.
16 Make sure that you remove the sample receipt and any other
paper from the exit slot or receipt transport.
17 Push the printer back into the ATM until it clicks into place.
18 Follow your in-house procedures for indicating that you have
fixed, without replacing, the receipt printer mechanism.
19 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the normal position.
20 Close and lock the exterior of the ATM.
To Next Page
Loading...
