Chapter 5: Programming 5-15
Programming Mode Program Parameters Default Setting
UPC/EAN Enable
Unused Disable
Extend UPC–A to EAN–13 Disable
Extend UPC–E to UPC–A Disable
Periodical Codes Disable
Periodical Code Extension No default value
Send Data Data As Decoded
Bar Codes-1
Set 2 Tag Label Off
Code 39 Disable
Minimum Characters Allowed 8
Full ASCII Disable
Check Digit Present Disable
Transmit Check Digit Disable
Allow 1- or 2-Character Tags Disable
Code 39 Tone Disable
Tone Length 75 Milliseconds
Tone Frequency 2232 Hertz
Code 39 Halves Enable Disable
Code 39 Stitch Enable Disable
Code 39 Check Digit Length 1 0 0
Code 39 Check Digit Length 2 0 0
Code 39 Specific Length 0
Code 39 Minimum Length 0 3
Code 39 Maximum Length 3 6
Scans Required 1 scan
Overlap Characters 2
Bar Codes-2
Minimum Segment Size 3
To Next Page
Loading...
