NCR RealPOS User Manual

5-16 Chapter 5: Programming
Programming Mode Program Parameters Default Setting
Interleaved 2 of 5 Disable
Bar Code Length Range Specific
Value 1 0 8
Value 2 1 6
Check Digit Present Disable
Transmit Check Digit Disable
Interleaved 2 of 5 Tone Disable
Tone Length 75 Milliseconds
Tone Frequency 2232 Hertz
Interleaved 2 of 5 Check Digit Length 1 0 0
Interleaved 2 of 5 Check Digit Length 2 0 0
Scans Required 2 scans
Overlap Characters 1
Bar Codes-3
Minimum Segment Size 3
Code 128 Disable
Minimum Data Character Allowed 3
EAN/UCC 128 Disable
Partial Decoding Disable
Code 128 Tone Disable
Tone Length 75 Milliseconds
Tone Frequency 2232 Hertz
Stitch Tag Disable
Scans Required 1 scan
Overlap Characters 2
Bar Codes-4
Minimum Segment Size 4
GS1 DataBar Enable Disable
Scan Required on
GS1 DataBar–14
1 Scan
Bar Codes-5
UCC-128 Emulation Mode Normal Mode

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)