: Default
BASIC SERVICE SETTING DATA
253 Ring transfer for Call Transfer-All Calls to a trunk when a sta-
tion holds another station/trunk
0
1
Available
Not available
254 Whether the Hold key of the Multiline Terminal is used as the
Call Park-Tenant Set key for an internal or external call
0
1
Call Park-Tenant Set key
Hold key
258 When the temporary service class returns to proper service class
(Forced Account Code and Authorization Code)
0
1
When called number has been dialed
When station goes on hook
259 Warning tone sent to connected parties when monitoring
Station-to-Station or Station-to-Trunk call
NOTE: Monitoring telephone conversations may be illegal
under certain circumstances and laws. Consult a legal
advisor before implementing the monitoring of
telephone conversations. Some federal and state laws
require a party monitoring a telephone conversation to
use beeptones, to notify all parties to the telephone
conversation, and/or to obtain consent from all parties
to the telephone conversation. Some of these laws pro-
vide strict penalties for illegal monitoring of telephone
conversations.
0
1
Not sent
To send (only once)
262 Multiline Terminal ringer volume control and sending of Ring
Test Tone
• To ring the ringer: press and dial 0
• To adjust the ringer volume: press
or
0
1
Available
Not available
265 Display of Busy Out from ACD/UCD group on DSS Console 0
1
To provide
Not provided
266 One hit ringing for Call Forwarding-All Calls 0
1
Restricted
Allowed
267 Hotel feature (Wake-up, Do Not Disturb, Message Waiting,
Room Cutoff) records printout on Hotel printer, and the report
is sent to PMS when setting or resetting the hotel feature from
Hotel Console or Administrative station
0
1
Available
Not available
Continued on next page
To Next Page
Loading...
