: Default
NOTE 1: The above ringer patterns (5-8) are effective only when CM31 Y=0>0: 04, 15.
NOTE 2: PATTERN 5 is standard setting for Brazil.
NOTE 3: PATTERN 6 is standard setting for France.
NOTE 4: PATTERN 7 and 8 are standard setting for EU.
Continued on next page
BASIC SERVICE SETTING DATA
397 Multiline Terminal ringing signal patterns for an internal/exter-
nal call and special ringing
[Other than North America/Australia]
0
1
Depends on the combination of
CM08>392 and 396
(See the following table)
Depends on the data set by
CM08>392 and 396