NEC Univerge SV8300 - Page 115

3-59 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICES
08
: Default
BASIC SERVICE SETTING DATA
425 Charging to the transferring station or transfer destination sta-
tion
0
1
Charging to transferring station
Charging to transfer destination sta-
tion
Shown below are stations to which call is to be charged in the case of various transfer patterns.
426 SMDR for incoming calls if the account code is not entered
NOTE: When CM08>426 is 1, SMDR for incoming call is not
provided even if CM13 Y=05 and CM35 Y=049 are 0
(To provide).
0
1
To provide
Not provided
427 Send additional DTMF signals when called station answers, if
assigning station number and additional DTMF signals to One-
Touch key on Multiline Terminal.
0
1
To send
Not sent
428 VMS transfer from attendant, if Camp-On is set and not
answered
0
1
To provide
Not provided
429 Automatic setting of OAI SMFR for Multiline Terminal Sub
line
[Cintech Jazz ACD only]
0
1
Available
Not available
430 Send Calling Party Subaddress to ISDN network when making
call from ISDN Telephone
0
1
To send (As per CM08>431)
Not sent
431 ISDN Calling Party Subaddress when making call from ISDN
Telephone
0
1
ISDN line station No. assigned by
CM10 Y=00
ISDN Telephone No.
Continued on next page
STA: station
DESKCON: Desk Console
Transfer Pattern
CM08>424=1
CM08>424=0
CM08>425=1
CM08>424=0
CM08>425=0
From To
STA A STA B
Split charging to STA A and
STA B
STA B STA A
STA DESKCON STA STA STA
DESKCON STA STA STA STA
DESKCON A DESKCON B
Split charging to DESKCON
A and DESKCON B
DESKCON B DESKCON A
JULY/17/2009
CM08