: Default
BASIC SERVICE SETTING DATA
463 Send ANI/Caller ID/CPN to SMDR terminal 0
1
To send
Not sent
464 OAI TSAPI
SCF facility
0
1
Same as 2400 IPX system (recom-
mended setting)
SMFN Off-Hook indication sent
465 SCF error code type 0
1
SCF error Detail
SCF error Kind
467 Method of readout the traffic information 0
1
To readout from the newest data
To readout from the oldest data
NOTE: Set the second data to 0 when measuring traffic data continuously per hour/day.
470 Send Backward GB signal when terminating to Attendant Con-
sole on DID MFC call
[8300R3.5]
0
1
Subscriber’s Line control
Subscriber’s Line Free (Charge)
471 Send Backward GB signal when terminating by tandem con-
nection or converting received digits on DID MFC call
[8300R3.5]
0
1
Subscriber’s Line control
Subscriber’s Line Free (Charge)
472 Request ANI signal/Caller ID from network when incoming
call terminates
[8300R3.5]
0
1
Available
Not available
473 Assign the connecting method when receiving Backward signal
meaning Line Busy/Unallocated number/Congestion
[8300R3.5]
0
1
Not released trunk (Tone/Announce-
ment from C.O.)
Release trunk (BT/ROT from PBX)
474 Send ANI signal to PSTN on Enhanced 911
[North America Only]
0
1
To send
Not sent
475 Sender Tone sending on Enhanced 911
[North America Only]
0
1
Not sent (No tone)
To send
477 Select the Backward signal for ANI signal on DOD MFC call
[8300R5]
0
1
Backward GC
[Mexico Only]
Backward GA
NOTE: Both CM08>477 and 487 should be set the same data.
Continued on next page
To Next Page
Loading...
