: Default
BASIC SERVICE SETTING DATA
817 OAI SMFN STS (status) when the forwarded call with Call
Forwarding-All Calls/Busy Line/No Answer is terminated to a
station via CCIS (SMFN FID=1)
0
1
SMFN STS=4/5/6
SMFN STS=0
OAI SMFN STS (status) when a station answers via CCIS the
forwarded call with Call Forwarding-All Calls/Busy Line/No
Answer (SMFN FID=2)
0
1
SMFN STS=5/6/7
SMFN STS=0
818 Send OAI SMFN when Exclusive Hold
[For EU]
0
1
To send
Not sent
820 Display of the monetary unit for ISDN call charge 0
1
Monetary unit is not displayed
As per CM04 Y=00>00
NOTE: When the second data is set to 1 and CM04 Y=00>00 is set to 01-31, $ is displayed.
Set this command for the area where the monetary unit is not displayed (where the dollar unit is not
used).
823 SMDR service for incoming calls of each station assigned by
CM13 Y=05
NOTE: To provide SMDR for abandoned incoming calls, as-
sign second data of CM08>823 to 0 (Ineffective).
0
1
Ineffective
Effective
824 DID Development Table for guest station 0
1
Development Table 1 for DID number
assigned by CM76 Y=90
Development Table 0 for DID number
assigned by CM76 Y=00
NOTE: Set the second data the same as the DID Development Table number assigned by CM35 Y=170.
825 Number of digits for a sequence used to communicate with the
PMS
0
1
3 digits (000-199)
2 digits (00-99)
826 Timing that the system sends a recovery process request to the
PMS on IP
0
1
At every connection establishment
At the first connection establishment
only since system reset
827 Parity check for Built-in SMDR on IP 0
1
None parity
Parity as for CM08>828
828 Kind of parity for Built-in SMDR on IP 0
1
Odd parity
Even parity
Continued on next page
To Next Page
Loading...
