: Default
BASIC SERVICE SETTING DATA
830 Kind of Center Office for Centralized Billing-CCIS 0
1
SV8300
2400 IPX
NOTE 1: Set this data to the Local Office of the Centralized Billing-CCIS. This data setting is not required for
Center Office.
NOTE 2: This data is available in NEAX 2400 IMS Extended Format. (Related Command: CM04 Y=01>07)
833 Whether to send SMDR output of abandoned incoming call
when no answer is received
0
1
Not sent
To send
835 Printing of each hotel feature record with the printer 0
1
To allow
Not allowed
836 System clock used for the SMDR output of outgoing/incoming
call
0
1
System clock of unit that the seized
trunk is accommodated (for outgoing
call)/System clock of unit that the ter-
minated trunk is accommodated (for
outgoing call)
System clock of Main Unit
837 System clock used for the SMDR output of station-to-station
call
0
1
System clock of the unit that the
seized trunk/calling station is accom-
modated
System clock of Main Unit
838 Tenant No. of built-in SMDR output
[8300R3]
0
1
Tenant No. 01 fixed
Tenant No. of CM12 Y=04/CM30
Y=01
839 Sending of OAI SMFN with intermediate information via OAI
queue
0
1
To send
Not sent
840 Send OAI SMFN when setting CAMP ON of OAI SMFN
FID=1 STS (status)=8 and when answering by pressing Answer
Key from the set PBX of OAI SMFN FID=2 STS (status)=8
0
1
To send
Not sent
841 Advice of Charge (AOC) information is sent to PMS
[Australia/France/Germany/Netherlands/Italy/Greece/
Luxembourg/Portugal/Spain/Sweden]
0
1
To send (dollar/euro charge)
Not sent (call unit)
NOTE 1: To send AOC to PMS, set the data as follows.
CM08>841: 0, CM08>404: 1, CM42>69, 70
NOTE 2: To send call unit to PMS, set the data as follows.
CM08>841: 1, CM08>404: 1
Continued on next page
To Next Page
Loading...
