: Default
BASIC SERVICE SETTING DATA
860 Printing way of Automatic Wake Up for an individual station
execution
NOTE: When the second data is set to 0, the record of RING
ON/STATION BUSY/CONNECTION BLOCK is also
printed with ANSWER/NO ANSWER.
0
1
To print process and result
To print only result
861 Printing the record of Do Not Disturb set/cancel from an indi-
vidual station
0
1
Not available
Available
862 Printing the record of Do Not Disturb for an individual station
set/cancel from a Front console/Hotel console/DSS console/
PMS/Attendant console
0
1
Not available
Available
863 Printing the record of Room Cutoff for an individual station set/
cancel from a Front console/Hotel console/DSS console/PMS/
Attendant console
0
1
Not available
Available
865 Printing the record of Message Waiting set/cancel from a Front
console/Hotel console/DSS console/PMS/Attendant console
0
1
Not available
Available
866 Printing of Room Status Code Record 0
1
Not available
Available
867 Printing the record of Check In/Check In cancel, Check Out/
Check Out cancel
0
1
Not available
Available
868 Printing the record when the PMS is connected/disconnected to/
from the system
0
1
Not available
Available
877 Whether to send the access code calling information to PMS 0
1
To send
Not sent
878 Printing the record of Automatic Wake Up set/cancel from an
individual station
0
1
Not available
Available
881 Method of call charge for ISDN calls 0
1
Information from ISDN network
Built-in charge on CPU
886 Setting for when SMDR billing memory overflow occurs 0
1
To clear the oldest billing memory
and to store the latest one
To clear the latest billing memory
NOTE: When CM04 Y=01>12 is set to “0” or “1”, the oldest memory is cleared and the latest one is stored
regardless of this data setting.
Continued on next page
To Next Page
Loading...
