: Default
BASIC SERVICE SETTING DATA
888 Setting of number of sending digits for printer
[8300R2]
0
1
Printer for 80 digits
Printer for 20 digits
890 Whether to provide ACC/AUTH for Station Individual Call
Record Print/Immediate Printout Call Record
[8300R2]
0
1
To provide
Not provided
893 Setting of decimals for Call charge
[8300R2]
0
1
Raise decimals to the next whole
number
Not raised
894 Replaying a Wake up call in English after replaying the first
Wake up call
[8300R2]
0
1
Available
Not available
895 Printout of language information from Hotel Printer, when set
language indicated number from Hotel Console
[8300R2]
0
1
Not available
Available
896 Memory used by Voice Response System (VRS)
[8300R3]
0
1
CF memory
SRAM (Built-in CPU)
NOTE: When CM04 Y=01>12 is set to “0” (SRAM [Maximum 27000 calls]), CF memory is set to the memory
used by VRS regardless of this command.
897 Incoming/Outgoing Calls while the system is out of service 0
1
Available
Not available
898 Assign the relay when using a Paging on Call Forwarding
[8300R2]
0
1
To operate the relay specified by the
intervening station
To operate the relay of PGD(2)-U10
Station (to use a Paging)
NOTE: This data is effective only when the intervening station is a Virtual Line Station.
Continued on next page
To Next Page
Loading...
