: Default
BASIC SERVICE SETTING DATA
909 Allow Built-in modem/Speech synthesis service/Voice
Response System (VRS) used by CF memory
0
1
Allow
Restricted
NOTE: Voice Response System (VRS) used by CF memory is effective for 8300R3 software or later.
911 Layout the key on CAT mode
[8300R3]
0
1
Old layout (8300R2 or before)
New layout (8300R3 or later)
NOTE 1: Refer to CAT key assignment on “CAT KEY FUNCTIONS”. Page 1-3
NOTE 2: When a DESI-less (DT330 DESI-less, DT730 DESI-less, DT710 DESI-less)/DT750 is used, CAT key
assignment is only new layout.
912 Select external relay control for MJ alarm
[8300R3]
0
1
When MJ alarm occurs the relay is
OFF, when MJ alarm is nothing the
relay is ON
When MJ alarm occurs the relay is
ON, when MJ alarm is nothing the
relay is OFF
920 Checking of Blade Lockup
[8300R3]
0
1
Not available
Available
921 Auto Blade Reset by Blade Lockup
[8300R3]
0
1
Not available
Available
NOTE: This data is effective only when CM08>920: 1 is set.
Continued on next page
To Next Page
Loading...
