: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
0XX 0 : Maintenance Port
XX: Unit No. (01-50)
124 IP Address for the SNMP
manager
(First place) NOTE
XXX.XX
...X
NONE
IP Address for the SNMP
manager
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
No data
125 IP Address for the SNMP
manager
(Second place) NOTE
126 IP Address for the SNMP
manager
(Third place) NOTE
127 Required IP Address for
the SNMP manager
(Fourth place)/Subnet
Mask of the IP Address
for the SNMP manager
(First place) NOTE
NOTE: The following conditions are applied to CM0B Y=0XX>124-127.
- Only Unit No. 01 can be set by this data.
- This data cannot be entered by CAT when using 8300R1 software.
- When setting the IP address by this data, a period (.) must be entered between
the numbers (example: 255.255.255.254).
- If no IP address for the SNMP manager (first place to fourth place) are set, the
access to the system is allowed to all SNMP managers.
Continued on next page
To Next Page
Loading...
