: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
1XX 1 : VOIP Port
XX: Unit No. (01-50)
36
37
38
39
40
43
UDP Port for SIP control
packet
TCP server Port for P2P
voice control
TCP client Port for P2P
voice control
RTP Base Port
Device Handler
Manager (DHM) Self
Port
UDP port Number for
communication with
Presence Server
[8300R4]
01024
65534
NONE
TCP/UDP/RTP Port num-
ber
1st data=36: 5060
(Port number 5060 is used)
1st data=37: 6100
(Port number 6100 is used)
1st data=38: 6200
(Port number 6200-6328
are used)
1st data=39: 56000
(Port number 56000 is
used)
1st data=40: 3300
(Port number 3300-3401
are used)
1st data=43: 5082
(Port number 5082 is used)
NOTE 1
NOTE 2
NOTE 3
NOTE 4
NOTE 1: Set this data when the router or firewall provides the restriction by the TCP
port.
NOTE 2: The same port number cannot be used for the port numbers set to the first data
“30-43”.
NOTE 3: Only Unit No. 01 can be set by CM0B Y=1XX>36, 43.
NOTE 4: CM0B Y=1XX>43 is not effective for Secondary Unit (Unit No. 02-50).
Continued on next page
To Next Page
Loading...
