NEC Univerge SV8300 - Page 162

3-106 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
LAN DATA ASSIGNMENT
0B
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
1XX 1 : VOIP Port
XX: Unit No. (01-50)
60 Primary IP Address for
DNS server
XXX.XX
...X
NONE
IP Address for DNS server
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
No data
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the IP address by this data, a period (.) must be entered
between the numbers (example: 255.255.255.254).
NOTE 3: Set the second data to NONE for Point-to-Multipoint connection (when
CMA7 Y=46 is set to “0”).
NOTE 4: When using Multi-Carrier Connection service, assign DNS server (pri-
mary) available for all the carriers.
61 Secondary IP Address
for DNS server
XXX.XX
...X
NONE
IP Address for DNS server
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
No data
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the IP address by this data, a period (.) must be entered
between the numbers (example: 255.255.255.254).
NOTE 3: Set the second data to NONE for Point-to-Multipoint connection (when
CMA7 Y=46 is set to “0”).
NOTE 4: When using Multi-Carrier Connection service, assign DNS server
(secondary) available for all the carriers.
Continued on next page
RESET
RESET
APRIL/16/2010
CM0B