EasyManua.ls Logo

NEC Univerge SV8300 - Page 163

NEC Univerge SV8300
804 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-107 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
LAN DATA ASSIGNMENT
0B
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
1XX 1 : VOIP Port
XX: Unit No. (01-50)
66 Valid duration of the first
query to a DNS server
0001
1440
NONE
1 minute
(1 minute increments)
1440 minutes
60 minutes
CM0B
Y=1XX>60,
61
CMBA
Y=25, 99
NOTE 1: This data setting makes the first query from a SIP trunk to a DNS server
effective.
NOTE 2: This data is not effective in the following version. In that case, a valid
duration of this data is fixed in 1 minute.
- 8300R2 version 9
- 8300R3 version 3 or later
NOTE 3: When a DNS server is used in a version except the above version, this
data must be set to “0001”.
NOTE 4: This data setting is invalid when the second data of CMBA Y=25 is set
to “1”.
NOTE 5: When the setting of this command is changed, the DNS cache table
should be cleared by CMBA Y=99.
70 Global IP Address for
VoIPDB of Remote Unit
of Remote UNIT over IP
when VoIPDB is con-
trolled by NAT
XXX.XX
...X
NONE
Global IP Address for
Vo I P D B
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
No data
CMBA
Y=139
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the Global IP address by this data, a period (.) must be
entered between the numbers (example: 255.255.255.254).
NOTE 3: When only one SIP trunk carrier is used, set Global IP address by
CM0B Y=1XX>70.
When Multi-SIP trunk carrier service is used, set Global IP address by
CMBA Y=139.
Continued on next page
RESET
~
~
RESET
JANUARY/31/2012
CM0B

Table of Contents

Other manuals for NEC Univerge SV8300

Related product manuals