: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
2XX 2 : VOIP Port
XX: Unit No. (01-50)
40 RTP Base Port for Voice
Packet transmitting/
receiving
01024
65534
NONE
RTP Port number
10000
CMA7 Y=46
CMBA
Y=30, 93
NOTE: The port number to be used for transmitting/receiving the RTP packets is
used at 2-port intervals from the Base port set by this command for each
channel.
For the default settings, the following port number is used.
54 FAX over IP
[8300R3]
0
1
Not available
Available
NOTE: This data is not effective for Secondary Unit (Unit No. 02-50).
90 Provide the call log
collection with VoIPDB
0
1
To provide
Not provided
NOTE: When changing this data of VoIPDB accommodated in a Remote Unit,
execute the system data copy by CMEC Y=8 to the Remote Unit.
91 Provide the fault log
collection with VoIPDB
0
1
Not provided
To provide
110 NLP (Non Linear
Processor)
0
1
OFF
ON
CM0B
Y=300>XX0
NOTE: Do not change this data when the system is operated normally.
Continued on next page
To Next Page
Loading...
