: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
72 DT300/700 series Display
Enhancement for Univer-
sal Design
[8300R3]
0
1
NONE
Second line is twofold font, First line is delete
Third line is twofold font, First line is delete
Twofold font is not display
CM90 Y=00:
F5030, F5031
NOTE: This data is effective only when DT330/DT710 (DESI-less only)/DT730/DT750 are used.
76 DT700 Menu time out
timer setting
[8300R3]
00
01
16
NONE
No time out
1 minute
16 minutes
4 minutes
NOTE: Set this data to “00” and reset the station when using DTPlusWare.
77 Dual Ringing
[8300R5]
0
1
Available
Not available
NOTE 1: Set this data for Mobility Access station from CAT/PCPro.
NOTE 2: “DATA ERROR” is displayed on LCD when System version license is not registered, if this data is set
to “0”.
78 Registration of master sta-
tion/sub station in suite
room
[8300R5]
0
1
3
Master station
Sub station
Ordinary station
CM12 Y=79
CM57 Y=34
79 Suite Room Group Number
[8300R5]
000
127
NONE
Suite Room Group number 000
Suite Room Group number 127
No data
CM12 Y=78
CM57 Y=34
NOTE: This data must be set for both master station and sub stations in suite room.
80 Trunk Access Code for Call
Forwarding in Mobility
Access Mode
[8300R6]
1
2
3
4
NONE
Trunk Access Code 1
Trunk Access Code 2
Trunk Access Code 3
Trunk Access Code 4
Trunk Access Code 1
CM20 Y=0-3:
A256, A267-
A269
CM64 Y=10,
14-16
Continued on next page
To Next Page
Loading...
