: Default
Y SETTING DATA
No. MEANING DATA MEANING
69 Provide Calling Number Display for the
My Line when an incoming call is termi-
nated to the Sub Line of Multiline Termi-
nal
[8300R3.5]
0
1
To provide
Not provided
70 Calling Party Number sending to ISDN
when making an outgoing call from Sub
Line (Terminal side)
[8300R5]
0
1
As per CM13 Y=71
Calling number of My Line
71 Calling Party Number sending to ISDN
when making an outgoing call from Sub
Line (Multiline side)
[8300R5]
0
1
Calling number of My Line
Calling number of Sub Line
73 Pilot station of 32-Party Conference with
password protection
[8300R5]
0
1
Pilot station
Ordinary station
NOTE 1: This data is effective only to the pilot station for the Conference group specified in CM04 Y=04: 0
(with password protection).
NOTE 2: The type of pilot station number for Conference assigned by CM12 Y=69 becomes ineffective when
the pilot station number is set by this data.
74 Hold tone select for Standard SIP station
[8300R6]
0
1
Hold Tone Source on CPU blade (selected by CM48
Y=0)
As per CM08>1007
NOTE: When setting External Hold Tone by CM48 Y=0/CM64 Y=1, External Hold Tone is selected regard-
less of this data.
To Next Page
Loading...
