: Default
Y SETTING DATA
No. MEANING DATA MEANING
61 Storage of the call history (IC) when han-
dling of unanswered a trunk call
0
1
To store
Not stored
63 Accommodation of D
term
70/PGD(2)-U10
ADP
0
1
To accommodate
Not accommodated
NOTE 1: Set this data only for a Base Port of DLC blade.
NOTE 2: Whether the following equipment can be accommodated to the same DLC blade or not depends on
this data.
- When the second data is set to “0”
Accommodatable : DT300/D
term
85/D
term
70/PGD(2)-U10 ADP
Unaccommodatable: D
term
75/DESKCON/DSS Console
- When the second data is set to “1”
Accommodatable : DT300/D
term
85/D
term
75/DESKCON/DSS Console
Unaccommodatable: D
term
70/PGD(2)-U10 ADP
64 Whether the station is for the outgoing
call of Conference
[8300R2]
0
1
Station for the outgoing call
Ordinary station
66 Reverse Contrast on the LCD for Univer-
sal Design
[8300R2]
0
1
Background: Black, Letters: White
Background: White, Letters: Black
NOTE 1: This data is effective only when DT330/DT710/DT730 are used.
NOTE 2: This data setting is valid by resetting DT300/700 Series when using 8300R2 software.
67 Accommodation of DTH-4R/DTL-8R
[North America Only]
0
1
To accommodate
Not accommodated
68 The DTMF signal is transmitted from
DT700 to D
term
IP (Set it to the station
number of D
term
IP)
0
1
To send
Not sent
NOTE: This data is used when IP Multiline Terminal or BCT (IVR) is connected to the system. This data is
assigned to the station number of IP Multiline Terminal/BCT (IVR).
Continued on next page
To Next Page
Loading...
