: Default
Y SETTING DATA
No. MEANING DATA MEANING
51 Kind of station in the hotel function 0
1
Administrative station
Guest station
NOTE: Set the second data to “0”, when the station except Hotel Console and Guest station is used.
52 Whether the PMS information for 8 char-
acters display in left-side on upper line of
LCD is to be displayed on administrative
station (Multiline Terminal) or not
0
1
Display information assigned by CM08>548
Not displayed
54 Provide Calling Number Display for the
My Line assigned by CM57 Y=30
0
1
To provide
Not provided
55 Provide Calling Number Display for the
stations of SLT/sub line of Multiline Ter-
minal/Virtual line/Virtual station for PS
that are accommodated to the Multiline
Terminal multiline as a subline
0
1
To provide
Not provided
NOTE: When terminating the call to the stations of SLT/subline of Multiline Terminal/Virtual line/Virtual sta-
tion for PS, the calling number is displayed on the LCD of the Multiline Terminal assigned by CM57
Y=30.
56 Call termination to Attendant Position/
station Night mode is set
0
1
Restricted
Allowed
57 Voice Mail Live Record-CCIS
[8300R5]
0
1
To provide
Not provided
NOTE: Set the second data to “0” for all the VMS ports performing Voice Mail Live Record-CCIS.
58 Operation at pressing another Line/Trunk
key while talking on the
station/trunk using Trunk-Direct Appear-
ances
0
1
Hold the call and seize the Line/Trunk key
Disconnect the call and seize the Line/Trunk key
59 Kind of VMS 0
1
Not used
In-Skin UMS
60 Storage of the call history (IC) when
answering a trunk call
0
1
To store
Not stored
Continued on next page
To Next Page
Loading...
