NEC Univerge SV8300 - Page 247

3-191 NWA-033623-001 Rev.8.1
91ch3002.fm
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS A
15
Service Restriction Class A
NOTE 1: Set Relocation is not available for the following combination.
• Single Line Telephone and Multiline Terminal
• PS and PS/Single Line Telephone/Multiline Terminal
• Single Line Telephone (DP) and Single Line Telephone (PB)
• Between the Multiline Terminal with the different number of Programmable Function Keys
• IP Multiline Terminal and Digital Multiline Terminal
NOTE 2: Combination of Multiline Terminals with different number of Line/Trunk keys Also, Set
Relocation should not be set to Multiline Terminals which accommodate the following
peripherals or function.
• DSS Console
• Add-on Module
• Analog Port Adapter
Continued on next page
: Default
Y SERVICE
REST.
CLASS (A)
SETTING DATA
No. MEANING DATA MEANING
129 WCS Number Sharing
Sub station is controlled as same as main station, by Message
Waiting lamp control signal sent to main station
00
15
0
1
Main station and sub
station are controlled
Only main station is
controlled
130 System Clock Setup by Station Dialing 0
1
Allow
Restricted
131 Set Relocation
Setting Side NOTE 1, NOTE 2
0
1
Allow
Restricted
132 Being moved and changed by Set Relocation
Set Side NOTE 1, NOTE 2
0
1
Allow
Restricted
133 Automatic Call Forwarding set by DISA 0
1
Allow
Restricted
134 Manual Call Forwarding set by DISA 0
1
Allow
Restricted
~
APRIL/16/2010
CM15