: Default
Y SERVICE
REST.
CLASS (A)
SETTING DATA
No. MEANING DATA MEANING
135 Keep volume level changed by volume button on Multiline
Terminal, after the call is finished.
00
15
0
1
Allow
Restricted
136 Calling Number/Calling Name Display for ISDN/T1-ANI/
MFC-R2 incoming call
0
1
Calling Number
Display
Calling Name Display
139 Short Message Notification (OAI)
[For PCS]
0
1
Allow
Restricted
140 Pad Lock Set/Reset from station 0
1
Allow
Restricted
141 Station Authorization Code Set/Change 0
1
Restricted
Allow
143 IP Station Logout operation 0
1
Allow
Restricted
146 Sending Switch Hook Flash for Adjunct Analog System 0
1
Allow
Restricted
147 Voice Mail Private Password-CCIS 0
1
Allow
Restricted
NOTE 1: The first data must be the preassigned VMS Service Restriction Class which is sent from the office via
CCIS.
NOTE 2: This command is not effective for the Service Restriction Class of own office.
148 PS Location Indication
[8300R2]
00
15
0
1
Restricted
Allow
149 PS Location Indication on Multiline Terminal display
[8300R2]
0
1
Allow
Restricted
204 Call Forwarding-PS Out of Cell (Zone) for PS Soft Key
[8300R2]
0
1
Destination setting of
each PS
Destination setting of
each tenant
Continued on next page
To Next Page
Loading...
