: Default
Y SERVICE
REST.
CLASS (A)
SETTING DATA
No. MEANING DATA MEANING
205 Selection of Off Hook Ring Volume 00
15
0
1
Off Hook Ring
Vo l u m e 2
(As per CM42>75)
Off Hook Ring
Vo l u m e 1
(As per CM42>74)
NOTE: The following operations are required when this data is changed.
Multiline Terminal : Disconnect the Multiline Terminal cable and connect the Multiline Terminal cable
again/Unplug the DLC blade and plug the DLC blade again.
IP Station : Logout the IP Station and login the IP Station again.
207 Indication when a station is set to the Line Key of Multiline
Terminal (DESI-less)
00
15
0
1
Station Number
Station Name
210 Display my line number on the Multiline Terminal 0
1
Restricted
Allow
211 Malicious Call Trace
[Australia Only]
0
1
Restricted
Allow
212 Preset Dialing on Multiline Terminal 0
1
Restricted
Allow
NOTE: If this data is set to “1” when using 8300R2 software or later, Preset Dialing on Multiline Terminal is
active regardless of the setting of CM12 Y=22.
213 SMDR service for station to station call 00
15
0
1
Allow
Restricted
214 Caller ID Display on each Multiline Terminal 0
1
Restricted
Allow
215 Blinking LCD for caller ID Display on each Multiline Termi-
nal
0
1
Restricted
Allow
216 Mobility Access Mode 0
1
Restricted
Allow
217 ISDN Alternative Routing in Remote Unit survival mode 0
1
Allow
Restricted
Continued on next page
To Next Page
Loading...
