3-265 NWA-033623-001 Rev.8.1
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK DATA
30
NOTE 1: For Remote Access to System (DISA), CM30 Y=30, 31 are effective only for a station call.
NOTE 2: When providing a Night Message for Automated Attendant, the 2nd Answering Message
which is assigned by CM49 Y=00 2nd data 02XX is used for the Night Message. In that case,
the 2nd data 08 of CM30 Y=30, 31 cannot be assigned for handling of Busy/Not Available
Automated Attendant destination.
Continued on next page
: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
30 Handling of busy/not available
Automated Attendant/Remote
Access to System
(DISA) destination in Day Mode
NOTE 1
NOTE 2
00
01
03
04
05
06
08
15
C.O. line release
Forward to TAS indicator
Forward to Attendant Console
[8300R2]
Forward to DIT station
Music + DT connection for Redial
DT connection for Redial
Automated Attendant:
2nd Answering message + DT connec-
tion for Redial or
Remote Access to System (DISA):
C.O. line release
C.O. line release
CM41 Y=0>34
CM30 Y=04, 05
CM49 Y=02
CM48 Y=2
31 Handling of busy/not available
Automated Attendant/Remote
Access to System (DISA) desti-
nation in Night Mode
NOTE 1
NOTE 2
00
15
Same as CM30 Y=30 Same as CM30
Y=30
32 Handling of timed-out Automated
Attendant/Remote Access to Sys-
tem (DISA) call in Day Mode
00
01
03
04
06
15
C.O. line release
Forward to TAS indicator
Forward to Attendant Console
[8300R2]
Forward to DIT station
DT connection for Redial
C.O. line release
CM41 Y=0>43
CM30 Y=04, 05
CM48 Y=2
NOVEMBER/12/2008
CM30
To Next Page
Loading...
