: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
33 Automated Attendant
Handling of all PBR busy when
2nd announcement and DT are
connected.
See CM30 Y=30/31: 08
00
01
03
15
C.O. line release
Forward to TAS indicator
Forward to Attendant Console
[8300R2]
C.O. line release
CM30 Y=30, 31
34 ISDN Local Office Code Table
number
00
14
15
Local Office Code Table No. 00
Local Office Code Table No. 14
Not assigned
CM50 Y=05
35 CIC (Circuit Identification Code)
used for No. 7 CCIS/SIP voice
channels
001
127
NONE
CIC 001
CIC 127
No data
CM35 Y=090, 091
NOTE 1: For Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”), be sure that the trunk route No.
assigned by this data does not overlap the trunk route No. used for IPT (P2P CCIS) within a same
office.
NOTE 2: Set this data after setting CM35 Y=090/091.
37 Handling of timed-out Automated
Attendant call in Night Mode
00
15
Same as CM30 Y=32 Same as CM30
Y=32
Continued on next page
To Next Page
Loading...
