: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
017 Digit addition and deletion
on a Tie line incoming call
NOTE: On an incoming
call from a Tie line,
if the number of
digits arriving from
the distant office
does not coincide
with the number,
the number of digits
is to be adjusted by
this data assign-
ment.
00
01
02
03
04
05
06
07
08
09
10
11
12
15
“0” add
“1” add
“2” add
“3” add
“4” add
“5” add
“6” add
“7” add
“8” add
“9” add
2-digits addition (CM50 Y=00>0)
1 digit deletion
2 digits deletion
Addition/deletion is not performed.
CM50 Y=00
018 Digit conversion on DID call 0
1
To provide
Not provided
CM35 Y=171
CM76
NOTE: When this data is set to “1”, digit conversion by CM76 is provided to the number of digits to be con-
verted on DID number set by CM35 Y=171.
020 Sender start condition
See PRECAUTION (2)
00
01
02
15
Wink Start/CCIS/SIP
Delay Dial
Ground Start
Timing Start (Prepause per CM35 Y=021)
CM35 Y=009
Continued on next page
To Next Page
Loading...
